Printer Components: Top Cover To Parallel Interface Card - Fargo Persona M110 User Manual

RESTRICTED USE ONLY

Printer Components: Top Cover to Parallel Interface Card

Components Description
Top Cover Opens to allow access to the Printhead, print ribbon and card path.
(Note: This cover must be closed in order for the Printer to begin
printing.)
Release tab Unlatches the Top Cover.
Printhead The component of the Printer that actually does the printing. (Note: This
component is fragile and must not be bumped or touched with anything
other than a cleaning pen.)
Power button The Power button
and LED to cancel the current print job and reset the Printer for the next print job.)
If a card is left within the Printer after a print job is canceled, it will
automatically be ejected when the Printer is turned back ON.
Media button The Media button
and LED operation and also to resume operation after an error condition is
cleared. (Note: In general, as the icon above this button indicates, errors
are related to either the ribbon or the cards. If an error occurs, the Media
LED will flash.)
See Interpreting the LED Lights in section 2, page 29 for more
information.
(Note: The Printer must have both the Power LED and the Media LED
illuminated in order to print.)
Card Automatically cleans cards for higher print quality. (Note: Clean the
Cleaning Card Cleaning Roller during every ribbon change (every 250 cards) or as
Roller needed.)
Card Input Load blank cards into this Hopper.
Hopper
Power Port Connect to the included power cord.
Parallel Connect to a Windows PC with a parallel cable.
Interface Port
Persona C11 Card Printer and Persona M11 Card Printer User Guide (Rev. 5.0)
turns the Printer ON and OFF. (Note: It also serves
is used to pause the Printer during normal
Fargo Electronics, Inc.
20