Cancel Button; Card Output - Fargo DTC550 User Manual

FOR RESTRICTED USE only
Reviewing the Lamination Module Sequence of Operations (continued)
Step Process
14 The Flipper Table Motor activates until the Flipper Table is homed.
15 The Flipper Table Clutch disengages.
16 Repeat Steps 2 through 7.
17 The card is fed out of the Printer.
Securing
Latches
Lamination
LED Light
Cancel
Button
Resume
(pause) Button

Card Output

Hopper
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
Lamination Station
Rejection
Card Hopper
Fargo Electronics, Inc.
Lamination
Top Cover
1-11