Setting The Printhead Resistance - Fargo DTC550 User Manual

FOR RESTRICTED USE only

Setting the Printhead Resistance

Step Procedure
1 Locate the Printhead Setting Number on the bottom of the Printhead.
The number reads R=XXXX.
2 Select MENU, Setup Printer, Print Settings and Printhead Resistance.
Enter the given value for the Printhead.
3 Press the DONE button to save the value. Press YES when asked to save
the change.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
Fargo Electronics, Inc.
11-20