Fargo DTC550 User Manual page 343

FOR RESTRICTED USE only
Reviewing Frequently-asked Questions (continued)
Question
What if I lose the
password for my Printer or
it is not accepted?
What do I do if the IP
address of my Printer is
being changed by my
network?
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
The DTC550 has a menu selection that allows the User
names and passwords to revert to default (Menu : Setup
Printer : Network Settings : Reset Passwords).
Follow this procedure:
1. Contact your network administrator. Ask that your
current IP address be reserved or ask that they
provide a specific IP address that you can use to
configure the Ethernet interface.
OR
2. Choose an IP address that you know will not be used
by any other PC, server or network device. Use those
settings to configure your Printer with static network
settings.
(Caution: Do not do this unless you know that these
settings will always be available.)
Fargo Electronics, Inc.
Answer
Continued on the next page
7-66