Using The Overlay Heat (O) Option - Fargo DTC550 User Manual

FOR RESTRICTED USE only

Using the Overlay Heat (O) option

Use this option to control the amount of heat the Printer uses when printing with the
overlay panel of a Ribbon.
Step Procedure
1 Move the slide to the left to cause less heat to be used in the printing
process. (Note: Certain card types may need additional heat for better
transfer of the overlay material.)
OR
Move the slide to the right to cause more heat to be used.
(Note: This control can be helpful for fine-tuning the transfer of overlay
onto the card.)
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
Fargo Electronics, Inc.
6-31