Selecting The Log Destination - Fargo DTC550 User Manual

FOR RESTRICTED USE only

Selecting the Log Destination

Specify one destination for the log.
Step Procedure – No event logging.
1 Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select the None radio button when no log is required. (Note: This is the
default.)
4 Select Submit.
5 Login as a root User if you are so prompted. Any change of setting will only
be accepted after you have successfully logged in.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
Fargo Electronics, Inc.
7-33