Reviewing The Laminator Temperature Adjustment - Fargo DTC550 User Manual

FOR RESTRICTED USE only

Reviewing the Laminator Temperature Adjustment

Term Description
Laminator To change the temperature of the Laminator, adjust its temperature
Temperature through the Lamination tab within the Printer Driver setup window.
Adjustment
•
New Temperature Settings: Once adjusted, the new temperature
settings will be sent down with the next print job along with the rest
of the Printer Driver information. Before printing begins, the
laminator will automatically adjust itself to the new temperature
setting. (Note: This new temperature setting will remain
programmed within the Printer until it is once again changed within
the Printer Driver or until the Printer is turned OFF.)
•
Automatic Reset: Whenever the Printer is turned OFF, the
laminator will automatically reset itself and return to its default
temperature the next time the Printer is turned ON. (Note:
Pressing the Lamination Module's or Printer's Cancel button or
switching the Printer power OFF and ON both serve to reset the
Laminator to its default temperature.)
•
Consistent Temperature: The temperature setting within the
Printer Driver stays the same until it is changed.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
Fargo Electronics, Inc.
2-33