Reviewing The Card Lamination Module - Fargo DTC550 User Manual

FOR RESTRICTED USE only Fargo Electronics, Inc.

Reviewing the Card Lamination Module

Danger: The Printer's Lamination Roller can reach temperatures exceeding 350° F
(175° C). Use extreme caution when operating the Laminator. Never touch the Lamination
Roller unless the Printer has been turned off for at least 20 to 30 minutes.
All DTC550 Printers support the attachment of an optional Card Lamination Module. This
module can be ordered pre-installed on your Printer from the factory or can be ordered
separately as a field upgradeable module.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8) 2-26