Color Mode; Print Modes; Print Passes - Kodak 210433-1 User Manual

1500 TX User's Guide

Color mode

Color mode refers to whether you are printing in color or monochrome.
To choose the color mode
1 Press Setup/Print Mode/Color Mode.
2 Choose Color or Mono.
3 Press OK.

Print modes

There are five print modes. Draft and Normal modes are suited for high speed
priting on most fabrics. Normal mode is the default. Quality and Enhanced modes
are usesd for printing on papers such as matte and photogloss. Use Enhanced
mode if banding occurs. In User mode, the printer paramters are defined by the
user at the control panel.
To choose print quality
1 Press Setup/Print Mode/Quality Mode.
2 Choose the desired quality.
3 Press OK.

Print passes

The number of passes indicates how many times the cartridges must fire to lay
down the ink for a complete scan line. You may select single, three, four, or six
passes, so that on a single pass, the jets fire a third (or a quarter) of the dots. If
you're printing an image with heavy fill or shading, setting the print mode to an
option that lays down less ink (e.g., four pass) can help prevent running and
bleeding.
To change the number of passes
1 Choose Setup/Print Mode/Print Passes.
2 Choose Single Pass, Three Pass, Four Pass or Six Pass.
3 Press OK.
3-4 Printer Options