3
Press the button on the NovaPrime to activate the vacuum and draw ink
through the line.
4
When ink is visible in the NovaPrime sight tube, remove the cartridge
needle from the NovaPrime and insert it into the hole in the top of the ink
cartridge. Be sure the needle is tightly connected.
5
Gently tighten the fitting (~1/4 turn) to prevent air leaks. Do not over-
tighten.
6
Remove the cartridge from the carriage and remove the blue tape from
the jet area of the cartridge.
1500 TX User's Guide
Getting Started 2-13