Table of Contents
Advertisement
Installing additional memory
Your printer is shipped with 8 MB of RAM and is upgradable to a
maximum of 128 MB, 64 MB per socket. Additional memory helps to
free the host computer more quickly.
Acceptable SIMM sizes
Printer memory may be upgraded by installing 72-pin SIMMs that are
either 32 or 36 bits wide. (The printer does not use parity bits.) The
SIMMs must not exceed a height of 2 inches (5 cm) and must conform
to JEDEC Std. 21-C, release 4.
The printer will accept 4 MB, 8 MB, 16 MB, 32 or 64 MB SIMMs.
The SIMMs in the following table have been tested and found to func-
tion properly in ENCAD printers. Other manufacturer's SIMMs may be
used if they are within the height limitation and conform to JEDEC
specifications; however, ENCAD does not guarantee compatibility.
ENCAD's bulletin board and Web page provide further information on
SIMM compatibility. You may want to check there for the latest infor-
mation.
Vendor
Micron
Samsung
Siemens
Toshiba
Micron
Samsung
Note: ENCAD printers do not use parity. Either 32-bit or 36-bit
4 Megabyte
MT8D132M-6,-7
KMM5321200AW-6,-7
-
THM3210B0ASG-60,-70
16 Megabyte
MT8D432M-6,-7
KMM5324100AK-6,-7
wide SIMMs may be used.
8 Megabyte
MT16D232M-6,-7
-
HYM322140S60,70
THM3220C0ASG-60,-70
32 Megabyte
MT16D832M-6,-7
KMM5328100AK-6
B
Advertisement
Table of Contents
