To fill the ink reservoir
Note: Before starting, you may want to do the following:
•
Have paper towels handy.
•
Wear disposable gloves.
!
Open only one reservoir at a time to prevent ink fromacciden-
tally contaminating another color.
1
Assemble the pouring spout by attaching the tube to the lid.
2
Replace the lid of the 500 ml ink bottle with the pouring
spout.
3
Be sure that the opening in the pouring spout tube is below the pouring
spout lid or ink will spill.
4
Open the front left cover to gain access to the reservoirs.
5
Remove the cap from the pouring spout.
6
Remove the cap from the reservoir you want to fill.
7
Verify that the ink color and type in the bottle and in the reservoir ink
match.
8
Pour the ink into the reservoir to ~1 inch from the top. Do not overfill.
9
Replace the cap on the reservoir and close the panel.
4-2 Printer maintenance and storage
1500 TX User's Guide