Nest Wait Time - Kodak 4800 Series Reference Manual

Large format 4800 series inkjet printers

Hide thumbs Also See for 4800 Series:

Table of Contents

Parameters which are monitored for Nest compatibility:

The following parameters will not affect nesting:

To enable nesting

Press Setup Menu/HP-GL/2 menu/Nesting Menu/Nest Enable.

Choose Nest On or Off.

Press OK.

Nest wait time

Nesting Wait Time is the amount of time the printer waits for the next plot to fill the

current nest.

The printer will begin printing whenever the printer has been idle for the specified time

interval. The time is reset whenever a print job is received.

• Print quality;

• Number of passes;

• Print direction;

• Speed;

• Color mode;

• DPI;

• Dry time;

• Margins;

• Wipe on/off; and

• Media Save.

• Ink limiting;

• Replots;

• If Auto Rotation is enabled, then the nesting algorithm is free to rotate

the plot if it determines that doing so will save media. Plots are sequen-

tially fitted across the page from right to left; and

• The HP-GL/2 EC command can be used to control cutting. If any plot in

a nest has the cutter enabled, the plotter will cut after the nest.

Reference Guide

HP-GL/2 options 3-5

Table of Contents