Table of Contents
Advertisement
Paper Option Menu
l
Supply Type
l
Media Standard
l
Margins
l
Auto-Load Delay
Supply type
Media standard
Margins
Auto-Load Delay
Auto-cut
Save Media
Auto-Wipe
Exit
l
Auto-Cut
l
Save Media
l
Auto-Wipe
l
Exit
provides access to a further menu to select the paper feed mode: roll, or
takeup(default).
provides access to a further menu to select the media standard: All
(default), US_Engr, US_Arch, ISO_A, M_DIN, ISO_B, Special_MAP,
Graphic_Arts, US_All, Metric_All.
provides access to a further menu to change the available plot area
based on the margin type elected. Select Normal (default) or Expanded
margins.
provides access to a further menu to change the delay between when
the media is loaded and when printing starts. This allows users to
adjust the media if necessary. Select 1-12 seconds. Default = 6.
provides access to a further menu to turn Auto-cut Off (default) or On.
When On, the printer cuts the media after printing is complete.
provides access to a further menu to turn Save media On (default) or
Off. When set to On, printing will stop at the end of the plot rather than at
the end of the frame size.
provides access to a further menu to turn the Auto-wipe function On
(default) or Off. When on, the cartridges are wiped during printing.
returns to the Setup menu.
1500 TX User's Guide
Menu Tree C-5
Advertisement
Table of Contents
