Table of Contents
Advertisement
1500 TX User's Guide
Examine the patterns to determine which value shows the best horizontal
and vertical alignment between cartridges. These are the values you will
set in the printer menu.
Defining Calibration Units
You can set the calibration units to English or Metric.
To set calibration units
1
Select Setup/User Setup/Units Select.
2
Choose English or Metric.
To adjust the alignment values
1
Install ink cartridges in the printer. (See Chapter 2 "Getting started" for
cartridge installation instructions.)
2
Load media in the printer that is at least 11 inches (28 cm) wide. (See
Chapter 2 "Getting started" for media loading instructions.)
3
Prime the heads to ensure that all cartridges fire correctly. Make sure
Color is the selected print mode.
4
Select Utilities/Color Calibration/Calib Print Test.
The test patterns print.
5
Examine the Current Heads pattern; the colored +'s should align with the
black lines. If any of the +'s don't align, perform the procedure for
adjusting the color values.
6
Press Cyan - Vertical.
7
Examine the printout and enter the number that represents the best
color alignment for cyan-vertical.
8
Repeat for each color and for horizontal alignment as well.
A-2 Calibration
Advertisement
Table of Contents
