Table of Contents
Advertisement
1500 TX User's Guide
2
Press Cyan Adjust - Vertical.
3
Examine the printout and enter the number that represents the best color
alignment for cyan-vertical. See Appendix A for details.
4
Repeat for each color and for horizontal alignment as well.
Cartridge recognition
The printer is designed to use only ENCAD TX cartridges. To eliminate potential
damage to the printer, a Cartridge Recognition feature checks to ensure that
ENCAD TX cartridges are installed, and that they are installed properly. Cartridge
recognition is performed when a print request is received (i.e., image data, prime,
etc.).
If the system detects a problem, the following error message is displayed on the
control panel: "Unrecognized Cartridge(s)" and the printer will beep three (3)
times.
To clear cartridge recognition error
1
Press Access Cartridges to move the carriage to the position which
allows replacement of the ink cartridges.
2
Verify that four ENCAD TX cartridges are installed. Replace any invalid
cartridges.
3
Press OK. If the problem has been corrected, the printer will proceed
with the print request.
Pausing the printer
To pause the printer while printing, press the Pause button. Press it again to
resume printing.
2-18 Getting Started
Vertical head-to-head test pattern
Black
Color
Advertisement
Table of Contents
