1500 TX User's Guide
Save Media
When the Save Media is On (the default), the media advances only as far as
needed to print the image. With the Save Media option turned off, the printer
advances the full print area of the loaded media. For example, if a 36 inch roll is
loaded, the printer advances the length of the print area for a standard 36 x 48"
sheet even if the printed image is only 30 inches long.
To turn off Save Media
1
Press Setup/Paper Option/Save Media.
2
Choose Off.
3
Press OK.
Auto-Wipe
The cartridge jet plates are periodically wiped during printing. The default for this
function is ON. If you are having problems with banding, you can sometimes
solve the problem by setting the wiper to OFF; however, this can cause clogging of
the inkjets.
To turn off the wiper
1
Press Setup/Paper Option/Auto-Wipe.
2
Choose Off.
3
Press OK.
3-8 Printer Options