Inter-Tel 8520 User Manual page 69

To store a number in a Speed-Dial location:
With the handset in the cradle, dial
1.
Dial the speed-dial location (0-9) you want to program.
2.
Enter the desired name for the speed-dial number, as described below:
3.
• Alphanumeric mode (Message button and lamp lit): Press the dialpad buttons
to enter the desired characters. (Refer to the chart on
of times a button is pressed determines which character is entered. For exam-
ple, 533266 would enter "JEAN." When adjoining characters are located
under the same button, press
For example, 66
correspond to the letters printed on dialpad buttons 2-9.) Press
to leave a space. Press
• Press
Dial the extension number or telephone number to be stored, as described below:
4.
• Numeric mode (Message button and lamp unlit): Enter the number.
NOTE:
includes an asterisk, pound, a hookflash (a quick hang up and release), or a
pause, press
hookflash, or four times for a pause. (Each pause or hookflash counts as one
digit.) You can enter more than one special character in a row by pressing
FWD
• Press
NOTE:
line, enter the Outgoing access code (default is
phone number.
To erase a Station Speed-Dial name and/or number:
With the handset in the cradle, dial
1.
Dial the desired location code (0-9) or press the desired Station Speed-Dial but-
2.
ton.
Press
3.
Press
4.
Press
5.
Press
6.
®
Inter-Tel Model 8520 User Guide
6667776 would enter "NORM." (Note that letters
FWD
MUTE
to save the name.
#
You cannot use hyphens or colons in the number. If your number
once for an asterisk, twice for a pound, three times for a
between the characters.
to save the number.
#
To dial outside telephone numbers without first selecting an outgoing
repeatedly until the name is erased.
MUTE
to continue.
#
repeatedly until the number is erased.
MUTE
to exit.
#
.
3 8 3
page
once to advance to the next character.
FWD
if you need to backspace.
) before the outside tele-
8
.
3 3
8
69.) The number
twice
FWD
57