Punch or fold the output
Deposit header-up / left (Paper Logic)
Orientation
Landscape
Deposit header-down or right
Deposit header-down / right (not Paper Logic)
Orientation
Portrait
Landscape
Punch the output
On the operator panel, press the 'Jobs' button.
1.
In the list of 'Waiting jobs' or 'Scheduled jobs', touch the job you want to edit.
2.
Press 'Properties'.
3.
Note:
You can also press the job 2 times to access the 'Properties' window. This function is
comparable to double-clicking with a mouse.
Press 'Punching'.
4.
Select the desired number of holes punched
5.
If required, define the other settings for the output.
6.
Enter the generic parameters in the 'Job' section.
7.
Press 'OK'.
8.
92
Chapter 5 - Working with the operator panel
Feed edge
Punch exam-
ple
Long-edge
feed
#
Feed edge
Punch exam-
ple
Long-edge
feed
Long-edge
feed
Feed edge
Punch exam-
ple
Short-edge
feed
Feed edge
Punch exam-
ple
Short-edge
feed
Short-edge
feed