Oce VarioPrint 6000 User Manual Operating Information page 137

Change a number of settings in the Settings Editor via the operator panel
Group of settings
'Logging'
'Connectivity'
Available settings
• 'Save the datad-
ump file'
• 'Save the trace
file'
• 'Print the config-
uration report'
• 'MAC address'
(read-only)
• 'Host name'
• 'Link speed and
connection
type'
• 'DHCP en-
abled'
•
'TCP/IP ad-
dress'
• 'Subnet mask'
• 'Default gate-
way'
• 'Primary DNS
suffix'
• 'DNS suffix fol-
lows domain'
• 'Test the
TCP/IP connec-
tion'
Chapter 5 - Working with the operator panel
Short description
When an error occurs, the help desk of
your printer supplier can ask you to create
and send a trace file and a datadump file.
The datadump file is a .zip file that con-
tains detailed technical information about
your system. Furthermore, the system can
store trace log files in .zip files. You can
save both .zip files to a USB drive.
The configuration report contains infor-
mation about the configuration of your
printing system, for example information
about the system configuration, controller
configuration and network settings. You
can print the configuration report for
backup purposes, for example.
Follow the instructions on the operator
panel when you save a file or print a re-
port.
The 'Connectivity' section contains the
main settings to integrate the printer into
a network. After you have adapted the
network settings, you can test the connec-
tion from here.
Follow the instructions on the operator
panel when you adapt the network set-
tings.
137