Oce VarioPrint 6000 User Manual Operating Information page 184

Main parts
Description of the main parts
Description of the main parts
1
2
3
4
5
6
184 Chapter 6 - Optional finishers and other devices
#
Part
Bypass
Punch path
Die set
Chip tray
Storage area for die
sets
Power switch
Description
The bypass is a short straight-through paper path for
documents that must not be punched.
Documents that must be punched follow the U-shaped
punch path. The puncher can handle media up to 216
g/m² (80 lb. cover).
The puncher can use many different die sets (see
set summary' on page
different types of holes in your documents for different
types of binding. You do not need tools or levers to
replace a die set (see
The chip tray collects the paper chips that arise from
the punching process. You can easily access and empty
the chip tray (see 'Empty the chip tray' on page
The storage area K6 inside the puncher can keep 3 die
sets.
The power switch turns the puncher on and off. The
puncher can only operate when the power switch
in the 'I' position.
185). The various die sets make
'Replace a die set' on page
'Die
189).
187).
is