Oce VarioPrint 6000 User Manual Operating Information page 53

When
The 'Check first set' setting in a 'Work-
flow profile' is 'On'
flow profiles' on page 121
is also enabled in the job
The 'Confirm start of job' setting in a
'Workflow profile' is 'On'
Note:
When you print streaming jobs
press the Hold key
Stop after a set
Press the Hold key
1.
The red LED of the Hold key
The machine stops when a set of the active print job
Stop after a page
Press the Hold key
1.
The red LED of the Hold key
The machine stops as soon as possible.
Note:
The memory of the machine can contain up to 50 pages. Therefore, it is possible for
the machine to print more than a set before the machine stops.
Stop after a job
In the list of 'Scheduled jobs' in the 'Jobs' view, touch the job after which the machine
1.
must stop.
Press 'Stop after job'.
2.
The machine stops as soon as the selected job has been printed. A red and white stop bar
indicates that the stop-after-job function is active. Touch 'Stop after job' again to remove
the stop bar and continue printing.
'Work with the work-
and this setting
or jobs that consist of 1 large set, you must always
2 times to stop the machine as soon as possible.
1 time.
starts to blink.
2 times.
starts to blink.
Chapter 5 - Working with the operator panel
Then
The machine stops each time the first set
of a print job is ready. You can check the
first set before you continue the print job.
The machine stops each time at the start
of a job. You must start each job manual-
ly.
is ready.
Stop a job
53