Perform a media registration for large media
Align the start of the ruler with point 'N' of the test sheet.
2.
[90] Align the ruler with 'N'
Read the value at the edge of the test sheet.
3.
Enter the value.
4.
Take the second test sheet.
5.
Repeat the steps 2 - 4.
6.
Take the third test sheet.
7.
Repeat the steps 2 - 4.
8.
Result
A pop-up message appears. The message asks you whether you want to print an extra test
sheet to verify the result of the registration. You can do one of the following.
•
Press 'Yes' if you want to print an extra test sheet to verify the result.
Wait for the sheet and check the result. Another pop-up message appears. Press 'Yes'
if the registration is correct. Press 'No' if the registration is not correct. Then the reg-
istration procedure will start again.
•
Press 'No' if you do not want to print an extra test sheet. The registration procedure
will be finished.
158
Chapter 5 - Working with the operator panel
- 5 0
0
+ 5 0
- 5 0
P r i m a r y X i m a g e p o s i t i o n
0
P r i m a r y Z i m a g e p o s i t i o n
+ 5 0
1 0 0 0
1 0 5 0
P r i m a r y d i a m o n d s h a p e
1 1 0 0
1 1 5 0
X l e n g t h
1 2 0 0
L
1 2 5 0