Oce VarioPrint 6000 User Manual Operating Information page 124

Work with the workflow profiles
Setting
'Check first
set'
'Confirm start
of job'
'Next output
tray'
124 Chapter 5 - Working with the operator panel
Values Effect
'On' The machine goes on hold after the first set of a
job is printed. You can check the quality and lay-
out of the first set before the machine prints the
remaining sets.
'Off' The machine will print the whole job without
stopping after the first set.
'As in job' The machine will print the jobs as indicated in the
job ticket.
'On' The machine always stops before the next sched-
uled job. You must press the Release key
each job.
'Off' The machine prints the scheduled jobs one after
the other. The machine does not stop before the
next scheduled job, unless there is a reason to stop.
For example when a media is not available.
'On conflict' The machine stops before a job when one or more
settings are overruled by the controller.
'After each job' Each job is sent to the next available output tray.
In this context, the second stack of the stacker is
also defined as an output tray.
'When tray is All the jobs are stacked until an output tray is full.
full' When an output tray is full, the next jobs are sent
to the next output tray.
to start