Main actions
'Split'
Change job settings
'Delete'
'Ticket'
'Proof'
How to combine print jobs
Touch 'Jobs' -> 'Queues' -> 'Waiting jobs'.
1.
Touch the jobs you want to combine.
2.
Note:
If all jobs you want to combine have the same label, you can also touch 'Select' -> 'Jobs
with label' to select all the required jobs at once.
Press 'Bundle'.
3.
The operator panel displays an overview of the bundled job.
If necessary, use the 'Up' and 'Down' buttons to change the job order.
4.
If necessary, change the job settings such as 'Number of bundles'.
5.
Press 'OK'.
6.
•
Delete print jobs, on page 67
•
Print a job ticket, on page 71
•
Make a proof, on page 70
Description
When you touch 'Split' after selecting a bundled job, the
job is split into the original, separate jobs. The bundled job
is removed. The separate jobs are added to the bottom of
the list of 'Waiting jobs'. You can use the 'Split' function
to correct mismatched settings, for example.
The 'Properties' window gives access to a pane where you
can do the following.
•
Change a number of job settings.
•
Change the order of the jobs in the bundle.
Delete the job.
Print the job ticket of the job.
Print 1 copy of the job first to check if the result meets your
expectations.
Chapter 5 - Working with the operator panel
Bundle jobs in the list of 'Waiting jobs'
73