Note:
Instead of 12.34.56.78 you must enter the host name or IP address of the PRISMAsync
controller. Booklet is the name you gave to the hotfolder when you created the automated
workflow.
Click 'Finish'.
5.
A log in screen will appear.
Enter the user name and the password that were defined when the hotfolder function
6.
was enabled in the Settings Editor.
Click 'OK.'
7.
The hotfolder is now ready for use.
If desired, you can create a shortcut to the shared network folder on the desktop of the
8.
workstation.
•
Introduction to hotfolders, on page 101
•
Activate the hotfolder function, on page 102
•
Create a hotfolder, on page 103
•
Create a hotfolder default ticket ('default_ticket.jdf'), on page 106
Create a shared network folder on a workstation
Chapter 5 - Working with the operator panel
105