Take the second test sheet.
5.
Repeat the steps 2 - 4.
6.
Take the third test sheet.
7.
Repeat the steps 2 - 4.
8.
Result
A pop-up message appears. The message asks you whether you want to print an extra test
sheet to verify the result of the registration. You can do one of the following.
•
Press 'Yes' if you want to print an extra test sheet to verify the result.
Wait for the sheet and check the result. Another pop-up message appears. Press 'Yes'
if the registration is correct. Press 'No' if the registration is not correct. Then the reg-
istration procedure will start again.
•
Press 'No' if you do not want to print an extra test sheet. The registration procedure
will be finished.
Perform a media registration for standard-size media
Chapter 5 - Working with the operator panel
151