Connecting A S-Video Or Video Source To Port 2 - Barco R9002380 Owner's Manual

Video input selection :
a. with the RCU : press digit button 1 or
b. with the local keypad.
(for access to the local keypad, see 'Local keypad' in chapter 'getting Started'.)
1 press ADJUST key, the General access menu is displayed on the screen (menu 1).
2. use the cursor keys to highlight 1 .
3. press ENTER to select the highlighted source.
GENERAL ACCESS
SHARPNESS
5 6
TINT
3 4
COLOR
1 2
BRIGHTNESS
CONTRAST
Enter ADJUST
Select with ,
or
then <ENTER>.
<EXIT> to return
menu 1

Connecting a S-Video or Video source to port 2.

Separate Y-luma/C-chroma signals for higher quality playback of Super VHS signals.
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
RS232 IN RS232 OU T
Input selection
a. with the RCU : press digit button 2 or
b. with the local keypad.
(for access to the local keypad, see 'Local keypad' in chapter 'getting Started'.)
1 press ADJUST key, the General access menu is displayed on the screen (menu 1).
2 use the cursor keys to highlight 2 .
3 press ENTER to display the source.
GENERAL ACCESS
SHARPNESS
5 6
TINT
3 4
COLOR
1 2
BRIGHTNESS
CONTRAST
Enter ADJUST
Select with ,
or
then <ENTER>.
<EXIT> to return
menu 1
5976066 BARCOCINE 7 011299
COMM PORT R G(S) B
(800 peri pheral s ) REMOTE
S-VIDEO
S VIDEO
R -Y Y(S) B-Y
Luma/Chroma
VCR S-VHS Audio amplifier
Connections
2-3