How To Adjust The Blanking - Barco R9002380 Owner's Manual

How to adjust the Blanking ?

Adjust the next blanking alignments until the image is correctly framed or the unwanted information is blanked out (image 1).
To enter a blanking alignment :
1. Push the cursor key é or ê to highlight the desired blanking position.
2. Press ENTER to select.
3. Press the cursor key é or ê to adjust the blanking.
4. Press ENTER to continue.
Left blanking
image 1
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with
then <ENTER>
<EXIT> to return.
5976066 BARCOCINE 7 07022000
Top blanking
Right blanking
Bottom blanking
Adjustment of the blanking on the of the image
Adjustment of the blanking on the bottom of the image
Correct by pushing the cursor keys up or
down
or
Adjustment of the blanking on the left side
Adjustment of the blanking on the right side
Correct by pushing the cursor keys to the
right or to the left
Random Access Adjustment Mode
7-19