How To Enter An Alignment - Barco R9002380 Owner's Manual

Random Access Adjustment Mode

How to enter an alignment ?

To enter an alignment :
1. Push the cursor key é or ê to highlight a function
2. Press ENTER to activate this function.
3. Press EXIT to return.
LEFT-RIGHT (E-W)
V CENTERLINE BOW
V CENTERLINE SKEW
RIGHT BOW
RIGHT KEYSTONE
LEFT BOW
LEFT KEYSTONE
SEAGULL CORRECTION
Select with or
then <ENTER>
<EXIT> to return.
7-14
Corrects for curvature of the vertical lines in the middle of
the image.
Corrects the tilting of the vertical lines in the middle of the
image.
Corrects for curvature of the vertical lines on the right side
Corrects the keystone geometry correction of the vert. lines on
the right side
Corrects for curvature of the vertical lines on the left side
Corrects the keystone geometry correction of the vert. lines on
the left side
Correct by pushing Correct by pushing
the cursor keys to
the cursor keys to
the right
the left
5976066 BARCOCINE 7 07022000