Connecting a Composite Video source.
Composite video signals from a VCR, OFF air signal decoder, etc..
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
' Ã r
v ur
hy
POWER / MAINS
COMM. PO RT
Video input selection :
With the RCU or built-in RCU : press digit button 1
Note
When using the loop-through Video output, then set the termination switch to the 'OFF' position.
Connecting a S-Video or Video source to port 2.
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS signals.
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
' Ã r
v ur
hy
P OWE R / MA INS
COMM. PO RT
5976227 BARCOCINE 8 13042000
PO RT 4/5
PO RT 2
PORT 3
8vrÃ
vqr
PO RT 4/5
PO RT 2
P ORT 3
PORT 1
PROJECTOR MODE
ÃrÃ
wrp
ÃÃhà v
6qvÃP
P ORT 1
P ROJECTOR MODE
Connections
2-3