Service Mode; Start Up; Overview Flowchart - Barco R9002380 Owner's Manual

8

SERVICE MODE

Service mode.

Start Up

1. Push the cursor key é or ê to select to SERVICE (menu 1).
2. Press ENTER to select.
The service menu will be displayed (menu 2).
Some items in the Service mode are password protected (when the password function is active). Enter your password to continue.
All other password protected items are now also available if you stay in the adjustment mode.
ADJUSTMENT MODE
Select a path from
below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
source 1
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Overview flowchart

SERVICE MODE
5976066 BARCOCINE 7 011299
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
PROJECTOR SET UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE
COMMON ADDRESS
BARCO LOGO
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
MEMORY BANKS
Service Mode
8-1