Start Up Of The Adjustment Mode; Adjustment Mode; Start Up - Barco R9002380 Owner's Manual

4

START UP OF THE ADJUSTMENT MODE

Adjustment Mode

Start Up

All picture adjustments are made while in the 'Adjustment mode'. Two possible ways to enter the adjustment mode :
Using the RCU.
Press the ADJUST key.
The projector displays the 'Main menu' (menu 2).
Using the local keypad.
1 Press the ADJUST key.
2 The projector displays the General access menu (menu 1).
Use the cursor keys (control disc) to highlight enter ADJUST
3
4 Press ENTER.
The 'Main menu' will be displayed (menu 2).
Note : to adjust the Analog picture controls with the local keypad while in the 'Adjustment mode', press the ADJUST key. The
next General Access menu will be displayed.
GENERAL ACCESS
SHARPNESS
5 6
3 4
1 2
BRIGHTNESS
CONTRAST
Select with ,
or
then <ENTER>.
<EXIT> to return
To adjust an analog control, handle as follow :
1 Push the cursor keys (contol disc) up or down to select the analog control to be adjusted.
2 press the ENTER key to confirm.
When the analog control is adjusted the projector returns automatically to the General access menu.
When you want to return to the Adjustment mode, press EXIT, otherwise select quit ADJUST and press ENTER to return
to operational mode.
You are now in the 'Adjustment mode' . The cursor keys are used to make menu selections and also vertical and horizontal
adjustments. The ENTER and EXIT keys are used to move forward and backward through the menu structure. The ADJUST
key can be used to terminate the adjustment mode while a path selection menu (head menu) is displayed.
5976066 BARCOCINE 7 011299
5
3
1
Enter ADJUST
menu 1
TINT
COLOR
GENERAL ACCESS
SHARPNESS
Image Control
6
TINT
4 IRIS Control
COLOR
2
Sound Control
BRIGHTNESS
Function keys
CONTRAST
Service Menus
Select with ,
or
then <ENTER>.
<EXIT> to return
menu 2
Start up Adjustment mode
MAIN MENU
Select with é or ê
then <ENTER>
<EXIT> to return.
4-1