Random access adjustment mode selection menu.
What is possible ?
This is the main menu for the Random Access adjustment mode.
Through this menu, the following adjustments and features are accessible :
- Picture Tuning
Sync slow/fast(only for RGB inputs)
Color Balance
Decoding
Port 2 : Video/S-Video
Peaking : Off
Line Doubler / Multiplier
- Geometry
- Convergence
- Color select
And also Orbiting, Contrast modulation, Soft Edge if these options are installed.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Picture Tuning
Start up the Picture Tuning
Push the cursor keys é or ê to highlight Picture tuning (menu 1).
1
2
Press ENTER.
The Picture tuning menu will be displayed.
Depending on the input source, the 'Picture tuning' menu will display different items (menu 2).
- Color Balance
- Sync slow/fast
- Port 2 : Video/S-Video
- Peaking : Off
- Line doubler
- Decoding : IRE/EBU
RANDOM ACCESS
ADJUSTMENT MODE
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Color Balance
What can be done ?
The Color Balance function is used to select or adjust the color temperature of white used by the projector.
The Color Balance can be adjusted on two different ways :
- fixed color balance. You have the choice between 3200 K (reddish), 4900 K, 6500 K (white) or 9300 K (bluish).
- Custom white and black balance.
5976066 BARCOCINE 7 07022000
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : EBU
PORT2 : VIDEO
PEAKING : OFF
LINE DOUBLER : ON
Select with é or ê
<ENTER> to accept
<EXIT> to return.
menu 2
Random Access Adjustment Mode
7-3