How To Change The Scan Rate; Motion Processing; Why Motion Processing; How To Activate - Barco R9002380 Owner's Manual

Main Menu

How to change the scan rate ?

Push the cursor keys é or ê to select a new scan rate (menu 1).
1
2 Press ENTER to activate this scan rate.
e.g. 100 Hz 625 lines P ==>
Vertical frequency of the image : 100 Hz
Quantity of horizontal lines : 625 lines
Interlace mode : P = Non-interlaced image (progressive scan).
MULTIPLIER MODE
50 Hz 625 lines
100 Hz 625 lines
50 Hz 1250 lines
100 Hz 1250 lines
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Motion Processing

Why Motion Processing ?

With this function it is possible to recognize whether the source material was originally film or video. That prevents the creation of
motion artifacts.

How to activate ?

Push the cursor keys é or ê to select 'Motion Processing' (menu 1).
1
2 Press ENTER to toggle between ON and OFF.
IMAGE PROCESSING
Line Multiplier : ON
Multiplier Mode
Motion Processing : ON

Video Equalizing

Noise Reduction
Contrast Enhancement
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Video Equalizing

What can be done ?

The shapness of the image can be adjusted for 3 frequency ranges (low, medium and high) separately.
To make it a little bit easy, 7 pre-programmed factory presets are available. The customer is also free to adjust its own sharpness
for the 3 ranges.

How to select Video Equalizing ?

Push the cursor keys é or ê to select 'Video Equalizing' (menu 1).
1
2 Press ENTER to display the adjustment menu (menu 2).
IMAGE PROCESSING
Line Multiplier : ON
Multiplier Mode
Motion Processing : ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5-4
P
P
P
I
MID
LOW
FACTORY PRESET : x
Select with ç or è
Adjust or scroll presets
with é or ê
<EXIT> to return.
menu 2
HI.
5976066 BARCOCINE 7 08022000