When The Source Is Selected; Picture Controls - Barco R9002380 Owner's Manual

Input Selection via the Local Keypad.
Handle as follow :
1 Press the ADJUST key to display the General access menu (menu 1).
2 Highlight the desired source number by pushing the control disc up, down, to the left or the right. Push the control disc up or down
to move the cursor up and down, push the control disc to the left or to the right to move the cursor to the left and to the right.
3 Press ENTER to confirm your selection.

When the source is selected

When a valid and available source is selected, there will be information displayed on the screen about that source. This information
includes :
- Source number
- Horizontal frequency
- Vertical frequency
Source 2
Fh= 15.6 kHz
Fv= 50 Hz
When the entry is a non valid source number, a warning appears on the screen : ' input not available '.
When a valid source number is selected, the projector will display this source or it will wait on the selected source number until the
source becomes available. A message 'source not available' will be displayed for a short time.

Picture controls

The picture controls can be adjusted with :
With the RCU
The control keys are located on the left side of the key panel of the RCU and indicated with the name of the control and an icon.
When an image control is pressed, a text box with bar scale and the function name of the control, e.g. 'brightness...' appears on the
screen (only if text is ON). The length of the bar scale indicates the current memorized setting for this source. The bar scale changes
as the + or - side of the button of the control are pressed.
With the local keypad
All controls are hidden in the General access menu.
1 Press ADJUST to display the General access menu.
2 Use the cursor keys to highlight the desired analog control and
3 Press ENTER to select.
5976066 BARCOCINE 7 011299
GENERAL ACCESS
SHARPNESS
5 6
TINT
3 4
COLOR
1 2
BRIGHTNESS
CONTRAST
Enter ADJUST
Select with ,
or
then <ENTER>.
<EXIT> to return
GENERAL ACCESS
5
3
1
Enter ADJUST
Select with
then <ENTER>.
<EXIT> to return
SHARPNESS
6
TINT
4
COLOR
2
BRIGHTNESS
CONTRAST
,
or
Getting Started
3-7