How To Start Up The Iris Touch Up; Iris Auto Converge; What Can Be Done; How To Start Up The Iris Auto Converge - Barco R9002380 Owner's Manual

Main Menu

How to start up the IRIS Touch Up ?

Push the cursor keys é or ê to select 'IRIS Touch Up' (menu 1).
1
2 Press ENTER to activate the touch up function.
The process starts and when successfully completed, the projector will return to image display of the current source.
IRIS CONTROL
IRIS Touch Up

IRIS Auto Converge

IRIS Full Alignment

Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
IRIS Auto Converge

What can be done ?

The autoconvergence on the current source will be carried out automatically, starting from the existing settings. By projecting
alternately red and blue lines, 25 convergence areas are aligned onto the green pattern.

How to start up the IRIS Auto Converge ?

Push the cursor keys é or ê to select 'IRIS Auto Converge' (menu 1).
1
2 Press ENTER to activate the autoconvergence function.
The process starts and when successfully completed, the projector will return to image display of the current source.
IRIS CONTROL
IRIS Touch Up
IRIS Auto Converge
IRIS Full Alignment
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
IRIS Full Alignment
What can be done ?
The IRIS full alignment function adjust the geometry of the image (coarse geometry alignment). This procedure takes about 45
seconds.

How to start up the IRIS Full Alignment ?

Push the cursor keys é or ê to select 'IRIS Full Alignment' (menu 1)
1
2 Press ENTER to activate the alignment function.
The process starts and when successfully completed, the projector will return to the IRIS control menu.
IRIS CONTROL
IRIS Touch Up
IRIS Auto Converge
IRIS Full Alignment
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5-8 5976066 BARCOCINE 7 08022000