Contrast Enhancement; What Can Be Done; How To Select And Adjust The Contrast Enhancement; Advanced Settings - Barco R9002380 Owner's Manual

Contrast Enhancement

What can be done ?

Enhancing the contrast results in a more dynamic image.

How to select and adjust the contrast enhancement ?

Push the cursor keys é or ê to select 'Contrast Enhancement' (menu 1).
1
2 Press ENTER to display the adjustment text box (menu 2).
Push the cursor keys é or ê to adjust the contrast.
3
4 Press ENTER to return to the 'Image Processing' menu.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION

ADVANCED SETTINGS

Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Advanced Settings

How to select the Advanced Settings ?

1. Push the cursor key é or ê to select 'Advanced Settings' (menu 1).
2. Press ENTER to select.
The advanced Settings menu will be displayed (menu 2).
A warning is displayed in the advanced settings menu : "Advanced adjustment should be performed only by qualified personnel".
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Time Base Correction

Why Time Base Correction ?

With the Time Base Correction function it is possible to clean-up low quality videotape noise to obtain a more stable image.

How to activate ?

Push the cursor keys é or ê to select 'Time Base Correction' (menu 1).
1
2 Press ENTER to toggle between ON and OFF.
LINE MULTIPLIER
LUMINANCE DELAY
V SYNC REF : INDIRECT
CLAMP GATING : OFF
FACTORY PRESET
WARNING : ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976066 BARCOCINE 7 07022000
Contrast
Enhancem.
-3
menu 2
LINE MULTIPLIER
TIME BASE CORRECTION : ON
LUMINANCE DELAY
V SYNC REF : INDIRECT
CLAMP GATING : OFF
FACTORY PRESET
WARNING : ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
0 +3
Random Access Adjustment Mode
7-9