DMD color correction
Adjust the DMD color values as required.
Adjusting color by precise chromaticity values
Change the values of the primary color components.
1. Select MENU > Configuration > Color Correction by x,y.
2. Adjust the slider or enter the measured color values of the primary color component you
selected.
3. To confirm your selection, select Enter.
4. Repeat steps 2 and 3 for each primary color component.
5. To view a specific color while adjusting, select Show Color Pattern.
6. Select the appropriate color and select Enter.
Adjusting color by saturation
Change the strength of the primary color in relation to the other primary colors.
1. Select MENU > Configuration > Color Saturation.
2. Adjust the value of the primary color you selected by using more or less of it in relation to the
other primary colors.
3. To confirm your selection, select Enter.
4. Repeat steps 2 and 3 for each primary color.
5. To view a specific color while adjusting, select Show Color Pattern.
6. Select the appropriate color and select Enter.
Signal color correction
Adjust the video signal color as required.
Adjusting color by temperature
Adjust the color temperature as expressed in degrees Kelvin.
1. Select MENU > Image Settings > Color & Gamma.
2. Select Color Temperature.
3. Adjust the slider to change the light to warmer or cooler and select Enter.
Adjusting color values based on gamma function
The gamma function options adjust the color values of the inputted signal to give you a more detailed
picture.
1. Select MENU > Image Settings > Color & Gamma > Gamma Function.
Boxer 30 (Bb.2) User Manual
020-102016-02 Rev. 1 (02-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Adjusting the image
20