Starting A Mixed Cp And Svc Or Svc Only Conference From The Conferences Pane - Polycom RealPresence Getting Started Manual

Starting a Mixed CP and SVC or SVC Only Conference from the
Conferences Pane
To start a SVC conference from the Conference pane:
1
2
Polycom, Inc.
In the Conferences pane, click the New Conference ( ) button.
The New Conference – General dialog box opens.
The system displays the conference default Name, Duration and the default Profile,
which contains the conference parameters and media settings.
The system automatically allocates the conference ID, when the conference starts.
By default, the system assigns the factory default profile to the conference, which is set
to AVC conferencing Mode.
To start a Mixed CP and AVC conference or an SVC-based conference, you must select
a Profile set to SVC or Mixed CP and SVC Conferencing Mode.
In most cases, the default conference ID can be used and you can just click OK to launch
the conference. If required, you can enter a conference ID before clicking OK to launch
the conference.
If you are the meeting chairperson or organizer using the RP Collaboration Server Web
Client to start your own meeting, you need to communicate the default conference ID
(or the one you created) to the other conference participants so they can dial in.
If no defined participants are to be added to the conference, or you do not want to add
additional information, click OK.
Chapter 3-Basic Operation
3-21