Change To Chairperson - Polycom RealPresence Getting Started Manual

Polycom® RealPresence Collaboration Server 800s Getting Started Guide
•
•
•
•

Change to Chairperson

Regular participants can request to become the conference chairperson using the
appropriate DTMF code (default: *78), which enabled them to perform operations
designated for chairpersons only.
The Change to Chairperson via the DTMF code (default: *78) is executed only if the
following settings were configured for the MCU and the conference:
•
•
3-68
A participant can request to speak more than once during the conference.
Supported in all conference types.
Supported in H.323 and SIP environments.
The duration of the icon display cannot be modified.
In the Conference IVR Service - Conference Chairperson dialog box, select the Enable
Chairperson Messages check box, and select the appropriate voice messages.
For more information, see Polycom® RealPresence Collaboration Server 800s
Administrator's Guide, "New Conference IVR Service Properties - Conference Chairperson
Options and Messages" on page 17-9.
When starting a new conference or defining a new Meeting Room, define the
Chairperson Password in the conference General dialog box.
For more information, see "Starting a Conference" on page 3-12.
Polycom, Inc.