Selecting The Collaboration Server Web Client Languages - Polycom RealPresence Getting Started Manual

22 Click Save & Close.
23 In the Success Message box, click OK.
24 In the Reset Confirmation dialog box, click Yes.
25 In the Please wait for system reset message box, click OK.
System restart may take up to five minutes.
26 Refresh the browser periodically until the Login screen is displayed.
27 When the Login screen is displayed, enter your Username and Password and click Login.
The Fast Configuration Wizard configures the Default IP Network Service with common parameters.
Specific or additional settings (e.g. for ICE, or Secured Mode) should be performed once the initial
configuration is complete. For detailed description of the IP Network Services, see the Polycom®
RealPresence Collaboration Server 800s Administrator's Guide, Network Services.

Selecting the Collaboration Server Web Client Languages

By default, the Collaboration Server Web Client interface is displayed only in English.
However, the system administrator can choose the languages available for selection on the
Login screen. These languages are represented by flags.
To choose the languages for selection in the Login screen:
1
Polycom, Inc.
Table 2-10 Fast Configuration Wizard – System Flags (Continued)
Field
Terminate
Conference when
Chairperson Exits
Auto Extend
Conferences
These flags can be modified later, if required, by selecting the System Configuration
option from the Setup menu. For more information, see the Polycom® RealPresence
Collaboration Server 800s Administrator's Guide, "Modifying System Flags" on page 21-1.
The system confirms successful configuration.
On the Collaboration Server menu, click Setup > Customized Display Settings >
Multilingual Setting.
Description / Default
When Yes is selected (default), the conference ends when the
chairperson exits even if there are other participants connected.
When No is selected, the conference automatically ends at the
predefined end time, or when all the participants have disconnected
from the conference.
When Yes is selected (default), allows conferences running on the
Collaboration Server to be automatically extended as long as there
are participants connected and there are available resources.
The maximum extension time allowed by the MCU is 30 minutes.
Chapter 2-First Time Installation and Configuration
2-21