11
Logging in to administrator mode
To configure the system or network setting, log in to the administrator mode.
%
In the login page, select "Administrator", and click [Login].
% Enter the administrator password in the page that appears, and then click [OK].
Reference
-
To log in to the user mode as an administrator, select [Administrator] - [Administrator (User Mode)], and
enter the administrator password.
-
Logging in to the administrator mode locks the control panel of this machine, and you will not be able
to use it.
-
Depending on the status of this machine, you may not be able to log in to the administrator mode.
-
When Mode 2 is selected in "Prohibited Functions When Authentication Error" in Administrator
Settings, if you enter an incorrect password a specified number of times, you cannot log in to the
administrator mode. For details on the authentication setting, refer to the "User' s Guide [Copy
Operations]".
-
The password entry page varies depending on the machine settings.
11-12
Logging in and logging out
VL6522c/VL5522c/VL4522c
11.2