10.4
Administrator Settings (G3)
10.4.11 Fax Settings - PBX Connection Setting
Specify the PBX line connection method.
If the PBX connection mode is enabled, specify an access code for an outside line. An access code refers to
a number used to connect to an outside line, such as a number beginning with a zero ("0").
Outside line numbers specified here are dialed, after which fax numbers registered with the address book or
program are dialed.
Press [No] to clear the entered settings, and then specify an access code (0 to 9999) using the keypad.
10.4.12 Fax Settings - Report Settings
Specify a way to output reports.
1/3 page
Item
Activity Report
VL6522c/VL5522c/VL4522c
Description
Configure output settings for Activity Report. To output the re-
port, configure the following settings.
Output Settings
Specify the time when the report is to be output.
Daily: Outputs the report every day at a certain time.
Every 100 Comm.: Outputs the report for every 100 communi-
cation jobs.
100/ Daily: Outputs the latest 100 communication jobs every
day at a certain time.
Output Time Set-
Allows you to specify this item if "Daily" or "100/ Daily" is se-
tings
lected for Output Settings. Specify the time when to output the
report.
10
10-29