Oce VarioLink 4522c User Manual page 192

9.2 One-Touch/User Box Registration
Item
Line Settings
Index
Icon
Reference
- To check a registered destination, select its registered name, and then press [Check Job Set].
- To change the settings for a registered destination, select its registered name, and then press[Edit].
- To delete a registered destination, select its registered name, and then press [Delete].
VL6522c/VL5522c/VL4522c
Description
Configure the line that is used to send faxes.
Overseas TX The transmission rate is set to a lower level when having a poor
communication.
ECM OFF Error Correction Mode (ECM) is cancelled to shorten the trans-
mission time.
This is an error correction mode defined by ITU-T (International
Telecommunication Union - Telecommunication Standardiza-
tion Sector). Fax machines equipped with the ECM feature
communicate with each other, confirming that the data sent is
free of errors. Thus, communication can be made free from
disturbances due to line noises, etc.
V34 OFF V34 is a communication mode used for super G3 fax commu-
nication. There are cases when the communication is not pos-
sible in super G3 mode depending on the telephone line
conditions when the recipient's machine or this machine is
connected to the line via a private branch exchange.
In such cases, we recommend that you transmit a fax by se-
lecting V34 OFF to disable the super G3 mode. The V34 mode
is resumed automatically on completion of transmission.
Check Dest. & When sending a fax job, a specified fax number is compared
Send with receiver's fax number information (CSI) and, if they match,
a fax is sent. A mismatch results in a transmission error occurs.
This prevents misdirected transmissions.
• To check the destination and send, the fax number of this
machine must be registered with the recipient's fax ma-
chine.
Select Line If two fax expansion kits are installed, you can select [Line 1]
or [Line 2] to send a fax. Specify the line used for sending fax-
es.
Select the index. For a frequently used destination, specify the
index characters and select [Favorites] at the same time. This
allows you to find it more easily.
Select an icon.
• The selected icon is used for the image panel function that
is available when the optional function code "CAA" is ena-
bled.
9
9-11