Fax Settings - Line Parameter Setting - Oce VarioLink 4522c User Manual

10
The following indicate how sender information is printed. (European model only)
- [ON]: The sender name, destination fax number (To: xxxxx), transmission start date and time,
transmission number, and the number of pages are added as the sender information. (European model
only)
- [OFF]: The sender name, fax ID of this machine, transmission start date and time, transmission number,
and the number of pages are added as the sender information.
10.4.8

Fax Settings - Line Parameter Setting

Configure items related to fax transmission and reception.
1/3 page
Item
Dialing Method
Receive Mode
Number of RX Call Rings
Number of Redials
Redial Interval
10-18
From : MFP01 To:123456789 05/25/2006 13:22
From : MFP01 987654321 05/25/2006 13:22 #138 P.001/001
Description
Select one of the following dialing methods.
• North American model (inch): PB/10pps
• European model (cm): PB
Select a receive mode.
• [Auto RX]: Automatically receives faxes.
• [Manual RX]: If you expect frequent phone calls, for example if an external
telephone is connected to this machine, set this mode to Manual RX.
d
Reference
For details on Auto RX, refer to page 6-3.
For details on Manual RX, refer to page 6-3.
Set the number of incoming call rings in the range between 0 and 15 (Default:
2).
Set the number of redials (for busy, no-answer, and so on) in the range be-
tween 0 and 7 (Default: 3 times).
Set redial intervals in the range between 1 and 15 minutes (Default: 3 min-
utes).
Administrator Settings (G3)
#138 P.001/001
VL6522c/VL5522c/VL4522c
10.4