Memory Rx Setting - Oce VarioLink 4522c User Manual

10
2/2 page
Item
Confirm Address (TX)
(G3)
Confirm Address (Regis-
ter) (G3)

Memory RX Setting

Specify whether to use Memory RX Setting function. To use the function, specify a password for print.
Press [No] to clear the entered setting and then specify a password using the keypad. (up to 8 digits)
The following screen is displayed if two units of fax kit FK-502 are installed, and [Individual Receiving Line
Setup] is set to [ON] in Administrator Settings.
10-24
Description
When specifying a fax destination with direct input, a screen appears
prompting you to enter the fax number again for confirmation. Entering the
fax number twice prevents one from entering incorrect destinations.
• When Confirm Address (TX) is enabled, you cannot specify a destination
using [Off-Hook]. You cannot specify the fax address using [Job History]
either.
When the user specify a fax destination when the user registers a program,
configures the fax forwarding settings, or registers a one-touch destination,
the user must enter the destination twice for confirmation. By entering twice,
you can prevent the destination from being incorrectly entered.
Administrator Settings (G3)
VL6522c/VL5522c/VL4522c
10.4