Forward Tx Setting - Oce VarioLink 4522c User Manual

10

Forward TX Setting

You can forward received documents to a preset recipient. The items that are to be configured are listed
below.
If two units of the fax kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in
Administrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line.
For details on [Individual Receiving Line Setup], refer to page 10-37.
Item
Output Method
Forward Dest.
Select Line
The following items are not available if Forward TX Setting is configured.
- PC-Fax RX Settings
- TSI User Box Settings
- Memory RX Setting
If "Confirm Address (Register)" is ON, a screen for entering the fax number again appears after you press
[OK]. Enter the fax number and then press [OK].
d
Reference
For details on the Confirm Address function, refer to page 10-23.
10-26
Description
Forward & Print: Received document are forwarded and printed on this ma-
chine.
Forward & Print (If TX Fails): Received documents are forwarded and, if for-
warding fails, are printed on the machine.
Allows you to enter a fax number using up to 38 digits. It is also possible to
select it from the address book.
If two units of fax kit FK-502 are installed, this setting can be specified for
each line.
Administrator Settings (G3)
VL6522c/VL5522c/VL4522c
10.4