9
9.3
User Settings
9.3.1
Displaying the User Settings screen
To display the User Settings screen, press the [Utility/Counter] key on the control panel, and then select [User
Settings] from the Utility menu that appears.
Reference
-
An item can also be selected by pressing the key on the keypad for the correspondent number. To
select [2 User Settings], press [2] on the keypad.
9.3.2
Custom Display Settings - Scan/Fax Settings
Customize the Fax/Scan mode screen.
Configure the default tab of Fax/Scan mode screen the (Default: Address Book).
1/2 page
Item
Default Tab
Program Default
Address Book Index De-
fault
Shortcut Key 1/Shortcut
Key 2
9-26
Description
Configure the default tab of Fax/Scan mode screen the (Default: Address
Book).
Configure the default Scan/Fax program screen (Default: PAGE1).
Select a index type that appears in the [Address Book] tab (Default: Fa-
vorites).
Allows you to register up to two shortcut keys for scan, original, or commu-
nication settings at the bottom of the screen.
•
Two shortcut keys can be registered. If an optional image controller
IC-412 is installed, only one shortcut key can be registered.
•
To delete the shortcut key, press [OFF].
•
If Shortcut Keys 1 and 2 are configured, [Language Selection] is not dis-
played on the Scan/Fax screen.
User Settings
9.3
VL6522c/VL5522c/VL4522c