Fax/Scan Initial Screen; Description Of Screen Components - Oce VarioLink 4522c User Manual

5
5.4

Fax/Scan initial screen

5.4.1

Description of screen components

Press [Fax/Scan] to display the following screen.
No. Item
1 [Address Book]
2 [Direct Input]
3 [Job History]
4 [Address Search]
5 [Off-Hook]
6 [Scan Settings]
7 [Original Settings]
8 [Communication Settings]
Reference
- If manual destination input is restricted in "Security Settings" in Administrator Settings, the [Direct Input]
tab is not displayed.
- If "Confirm Address (TX)" is set to "ON", [Off-Hook] is not displayed. For details on the Confirm Address
function, refer to page 10-23.
- For details on the LDAP server setting, refer to the "User's Guide [Network Administrator]" - "LDAP
setting".
- The display position for each tab varies depending on the User Settings. For details, refer to page 9-26.
5-20
1 2 3
6 7
Description
Press to select the recipient from the pre-registered
destinations.
Press to directly enter unregistered destinations.
Select the desired one from the destination history.
Press this button to search a destination registered on
the LDAP server.
Press this button to put the machine into the off hook
state ready for dialing.
Allows you to configure detailed settings for scanning
the document.
Allows you to configure the detailed settings for the
original type and original direction.
Press to configure communication settings.
Fax/Scan initial screen
4 5
8
VL6522c/VL5522c/VL4522c
5.4
Refer-
ence
p. 5-21
p. 5-25
p. 5-32
p. 5-33
p. 5-35
p. 5-36
p. 5-55
p. 5-58